Yamaha YZF-R3 / MT03 exhaust dyno test and superbike build. How much power does the R3 make?
2019, June 06
by Norton Racing
The most extensive Yamaha R3 exhaust and Superbike build information you’ll find anywhere! Read on! It’s been a couple years since I first released my article on the Yamaha R3’s power and some of the available exhaust systems. But a lot has changed in the past couple years so it was time for an update.
- Published in Dyno Testing and Tuning, Electronics, Engine and Transmission, Intake and Exhaust
23 Comments
What’s the best? What’s the difference??? This article used to be combined with some dyno and exhaust stuff for the Yamaha R3, but with all the different engine tuning options on the market today, I felt it necessary to discuss it a little more and create a separate article. There are three main categories of
- Published in Electronics, Electronics
Race Report: 2017 AFM Round 1 – Buttonwillow
2017, March 20
by Norton Racing
I didn’t think I was going to make it to AFM 2017 Round 1 at Buttonwillow, but it turns out my plans with my wife were Friday night, not Saturday night. So with only 4 hours of sleep, I got up early and rushed to finish packing the trailer. Last week was so hectic that
Race Report – CVMA 2016-2017 Round 5 – Chuckwalla Valley Raceway (CCW) – Yamaha R3
2017, March 04
by Norton Racing
Since I had to miss CVMA Round 4 in January, this past weekend was my welcome back to racing after the short winter break here in Southern California. It’s so nice that we have such amazing weather here and get to race motorcycles while the rest of the country is buried in snow. So nice
- Published in Race/Ride Reports, Suspension, Wheels and Tires
How to install a Yoyodyne slipper clutch in the Yamaha R3
2016, December 10
by Norton Racing
The Yoyodyne back torque limiting clutch, or slipper clutch as it’s commonly called, is a clutch that uses a set of 1 way ramps, ball bearings, and springs pressed against the clutch boss to allow the clutch to engage when torque is applied in the drive direction, but allows the clutch boss to ride on the ball
- Published in Engine and Transmission, How To
Race Report – WERA 2016 Grand National Finals – Barber Motorsports Park – Yamaha R3
2016, November 05
by Norton Racing
This summer’s busy race season has finally come to an exciting culmination at Barber Motorsports park in Birmingham, AL at the 2016 WERA Grand National Finals over the weekend of October 20-23. The Yamaha R3 cup race is also part of the WERA GNF, and is a separate race on Sunday where the winner of
- Published in Race/Ride Reports
Race Report – CVMA 2016-2017 Round 1 – Chuckwalla Valley Raceway (CCW) – Yamaha R3
2016, September 20
by Norton Racing
The moment we have been testing for, training for, and anxiously awaiting has finally come! Chuckwalla Valley Raceway CVMA Round 1 happened this past weekend and team YamahaR3Racing.com came ready. Zeke and I were joined by our new team rider, Toby Khamsouk. Toby is a close friend of Zeke’s and the two kids having been
- Published in Race/Ride Reports, Wheels and Tires
Race Report – WERA West 2016 Round 4 – Auto Club Speedway – Yamaha R3
2016, July 30
by Norton Racing
Team YamahaR3Racing.com was out in full force the weekend of July 23-24th at Auto Club Speedway in Fontana, CA for the WERA West Round 4. I showed up for the track day on Saturday to get some practice on the small bike since I hadn’t ridden ACS for a few years, and the last time was
- Published in Chain and Sprockets, Electronics, Engine and Transmission, Race/Ride Reports
Race Report – WERA West 2016 Round 3 – Buttonwillow Raceway – Yamaha R3
2016, May 23
by Norton Racing
It was a bit of a mad dash, but we finished Zeke’s bike in time for the WERA West event this past weekend. Sergio installed his forks Friday night, so not exactly a lot of breathing room 🙂 but we made it. I did the paint (writeup coming soon on my budget painting technique, costs
Race Report – CVMA 2015-2016 Round 7 – Chuckwalla Valley Raceway CW – Yamaha R3 2015
2016, May 15
by Norton Racing
Round 7 of the CVMA 2015-2016 Series was unforgettable! The best round of racing I’ve had at Chuckwalla, and there are some awesome videos to watch below. After missing round 6 of the CVMA series and racing the opening round of the 2016 AFM series, I was dying to get the bike back to Chuckwalla.
- Published in Race/Ride Reports, Suspension, Wheels and Tires