Woodcraft Underfork Front Stand Lifter Conversion Kit – Pin Style
$24.99
*Additional shipping charges apply for this item.
*Important* This is an awesome design for a front stand that is much more stable for bikes like the Yamaha R3 and Ninja 400 with single calipers. However, the tips of the stand pins are a little too long to work with the 2019+ Yamaha R3 forks because they contact the axle and the axle cannot be removed while on the stand. Because we like the stand design so much, we took the time to grind the tips off of the pins so I could use this stand for my personal 2019 Yamaha R3. We don’t do this prior to shipping, but recommend that you do so if you have a 2019+ R3, or take it to a professional to have them ground to fit your 2019+ R3 and remove the axle. Again, these are NOT pre-ground for the 2019+ R3, do so at your own risk!
OZ Racing, BST, and most Marchesini aftermarket wheels use a different bolt pattern from OEM for rear sprockets. 5 bolts, 10.5mm diameter, on a 100mm bolt circle with 76mm center hub diameter. Use these sprockets instead.
*(Marchesini wheels for Yamaha R3 use OEM sprockets)
*These sprockets are special order only, no returns.
OZ Racing, BST, and most Marchesini aftermarket wheels use a different bolt pattern from OEM for rear sprockets. 5 bolts, 10.5mm diameter, on a 100mm bolt circle with 76mm center hub diameter. Use these sprockets instead.
*(Marchesini wheels for Yamaha R3 use OEM sprockets)
*These sprockets are special order only, no returns.
OZ Racing, BST, and most Marchesini aftermarket wheels use a different bolt pattern from OEM for rear sprockets. 5 bolts, 10.5mm diameter, on a 100mm bolt circle with 76mm center hub diameter. Use these sprockets instead.
*(Marchesini wheels for Yamaha R3 use OEM sprockets)
*These sprockets are special order only, no returns.
Woodcraft Gen III Dual Temp Tire Warmers – 150 Rear Tire for Small Bikes
$417.99
FREE SHIPPING on this item!
*These are the tire warmers I use on my personal race bikes. They are extremely durable and reliable and turn off automatically when removed from the tire so you’ll never burn them out by leaving them plugged in.
*Important* This is an awesome design for a front stand that is much more stable for bikes like the Yamaha R3 and Ninja 400 with single calipers. However, the tips of the stand pins are a little too long to work with the 2019 Yamaha R3 forks because they contact the axle and the axle cannot be removed while on the stand. Because I like the stand design so much, I took the time to grind the tips off of the pins so I could use this stand for my personal 2019 Yamaha R3.
Woodcraft Adjustable Height Rear Stand – Spool/GP Lifter Style
$161.49
***We strongly recommend the use of Superbike GP style stands and lifters. The bike is more stable on the stand and the superbike lifters on the bike are much less susceptible to damage in a crash.
Marvic and Galespeed aftermarket wheels use a different bolt pattern from OEM for rear sprockets. 6 bolts, 10.5mm diameter, on a 100mm bolt circle with 80mm center hub diameter. Use these sprockets instead.
