FlashTune ECU-Based Quickshifter Kit for Flashed ECUs – Kawasaki Ninja 400 / Z400 (2018-2022)


FREE US SHIPPING on this item!

*ECU Flash or Flash harness required to enable and program quickshift settings.

ECU-Based Quick shifter Kit for the 2018-2022 (only) Kawasaki Ninja 400 / Z400

Depending on your rearsets, and wether you’re running GP or Standard shift, you may also need different shift rods. We highly suggest using our Perfect Shift Kit and the FTECU Universal Shift Rod Kit.

All quickshifters MUST be installed by a licensed professional. The overwhelming majority of quickshifter failures are due to installation errors, if your quickshifter fails and a licensed professional (Technician and/or shop) didn’t install it, we will not replace it.



ECU-Based Quickshifter Kit

With this kit and your flashed ECU you can up-shift without letting off the throttle or pulling the clutch!
This kit includes everything you will need to utilize your FTECU-flashed ECU’s Quickshifter Input.

Our new QS sensors are now smaller and more reliable than ever! Manufactured by us here in the USA!

Note: Shift sensor connector with Red wire is for PUSH switch, shift sensor connector with Black wire is for PULL switch

This kit includes:
– QS sensor (PUSH/PULL).
– Rod kit for your bike (cutting may be required to fit)
– Harness to interface to your ECU.

Additional information

Weight 0.3 lbs
Dimensions 7 × 5 × 1.5 in


There are no reviews yet.

Be the first to review “FlashTune ECU-Based Quickshifter Kit for Flashed ECUs – Kawasaki Ninja 400 / Z400 (2018-2022)”