Woodcraft Underfork Front Stand Lifter Conversion Kit – Pin Style
$24.99
*Important* This is an awesome design for a front stand that is much more stable for bikes like the Yamaha R3 and Ninja 400 with single calipers. However, the tips of the stand pins are a little too long to work with the 2019+ Yamaha R3 forks because they contact the axle and the axle cannot be removed while on the stand. Because we like the stand design so much, we took the time to grind the tips off of the pins so I could use this stand for my personal 2019 Yamaha R3. We don’t do this prior to shipping, but recommend that you do so if you have a 2019+ R3, or take it to a professional to have them ground to fit your 2019+ R3 and remove the axle. Again, these are NOT pre-ground for the 2019+ R3, do so at your own risk!
Description
With this Front Stand Conversion Set- you can convert your Woodcraft Front Under Fork Pad stand into a Pin Style stand.
This is for the PINS ONLY!!!
*Additional shipping charges apply for this item.
*Important* This is an awesome design for a front stand that is much more stable for bikes like the Yamaha R3 and Ninja 400 with single calipers. However, the tips of the stand pins are a little too long to work with the 2019+ Yamaha R3 forks because they contact the axle and the axle cannot be removed while on the stand. Because we like the stand design so much, we took the time to grind the tips off of the pins so I could use this stand for my personal 2019 Yamaha R3. We don’t do this prior to shipping, but recommend that you do so if you have a 2019+ R3, or take it to a professional to have them ground to fit your 2019+ R3 and remove the axle. Again, these are NOT pre-ground for the 2019+ R3, do so at your own risk!
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 3 × 5 × 2 in |
You must be logged in to post a review.
Reviews
There are no reviews yet.