FTECU ECU Based Quickshifter – Kawasaki Ninja 400 / Z400 (23+) / 500 (24+)


FREE US SHIPPING on this item!

*ECU Flash or Flash harness required to enable and program quickshift settings.

ECU-Based Quick shifter Kit for the 2023+ (only) Kawasaki Ninja 400 / Z400 and 2024+ Ninja 500

Depending on your rearsets, and wether you’re running GP or Standard shift, you may also need different shift rods. We highly suggest using our Perfect Shift Kit and the FTECU Universal Shift Rod Kit.

All quickshifters MUST be installed by a licensed professional. The overwhelming majority of quickshifter failures are due to installation errors, if your quickshifter fails and a licensed professional (Technician and/or shop) didn’t install it, we will not replace it.



With this kit and your flashed ECU you can up-shift without letting off the throttle or pulling the clutch! This kit includes everything you will need to utilize your FTECU-flashed ECU’s Quick shifter Input. Note: Red/Yellow is PULL signal, Blue/Green is PUSH signal. If you are using this kit on rearsets other than stock we’d suggest purchasing a shift rod kit shown below to insure you will have multiple rod length options to work outside of the stock configured rods included in the kit.


This kit includes:

  • QS sensor (PUSH/PULL).
  • Rod kit for your bike (cutting may be required to fit)
  • QS Adapter to interface to your ECU (Gear Position Sensor).


  • Kawasaki Ninja 500 2024 +
  • Kawasaki Ninja 400 / Z400 2023-2024 (only)

Additional information

Weight 0.4 lbs
Dimensions 10 × 4 × 1 in

USA / International, Euro Only (BR5)


There are no reviews yet.

Be the first to review “FTECU ECU Based Quickshifter – Kawasaki Ninja 400 / Z400 (23+) / 500 (24+)”